KCLUG

10 participants
3253 discussions

MrZaius moving back to KC!
by cragos＠gmail.com 27 Dec '06

27 Dec '06

Looks like I'm moving back to the KC metro, thanks in part to the LUG. Got a few questions about the area, since this will be the first time I'll have lived in the KC area outside of college housing, and will therefore be the first time I'll be paying taxes outside of Illinois. It'll also be the first time in my life when I'll have any real choice over my ISP. Verizon and a couple little wireless companies are pretty much it, back home. I apologize in advance if any of these questions trigger a flamewar, but I'm going to have to make a number of important decisions surrounding each in the coming weeks. 1: ISP Choice: I've heard recommendations for Everest and Time Warner cable service, and I've heard that Speakeasy offers some sort of DSL service over the local telcos' copper. Who have you found to be most reliable and easiest to deal with? 2: Kansas vs Missouri, with regards to taxation: I'm not likely to buy a house anytime soon, so the main questions are these: Which state is it cheaper to pay income tax and keep a car in? 3: Neighborhood recommendations: Any neighborhoods or suburbs you love or prefer to steer clear of? 4: Where are the decent used computer-parts stores? Looks like my old haunt in Pleasant Valley has disappeared. Thanks everybody, -Sean Crago/MrZaius

3 2

Re: MrZaius moving back to KC!
by James R. Sissel 27 Dec '06

27 Dec '06

>1: ISP Choice: >I've heard recommendations for Everest and Time Warner cable service, >and I've heard that Speakeasy offers some sort of DSL service over the >local telcos' copper. Who have you found to be most reliable and >easiest to deal with? I use AT&T as my DSL provider. They are reliable but not the cheapest. I'm going to have to have a chat with them about that. >2: Kansas vs Missouri, with regards to taxation: >I'm not likely to buy a house anytime soon, so the main questions are >these: Which state is it cheaper to pay income tax and keep a car in? I've found that Kansas charges more income tax that Missouri. Don't live or work in Kansas City, Missouri. If you do they will charge you a 1% city income tax right off the top. >4: Where are the decent used computer-parts stores? Looks like my old >haunt in Pleasant Valley has disappeared. If I have to shop at a local store I usually go to MicroCenter on 91st and Metcalf but I usually try to buy at www.newegg.com. There is a used PC store in the shopping center across from the Bannister area Wal-Mart Supercenter. I've donated a few things there years ago just to get rid of them but never bought anything. Most of my latest donations have been at the recycling center in the Bannister Wal-Mart Supercenter's parking lot. They work with the Surplus Exchange. By the way, that recycling center is great. They take almost anything ... paper, phone books, magazines, cardboard, glass, plastic (1&2), Styrofoam, metal cans, metal in general, and have a "free" table.

2 1

look, someone has reinvented the minicomputer architecture!
by David Nicol 24 Dec '06

24 Dec '06

http://userful.com/ad/public-computing-multi-user -- perl -le'1while(1x++$_)=~/^(11+)\1+$/||print'

6 6

Re: Cups - lpoptions - I Dunno?!?!
by RtX 22 Dec '06

22 Dec '06

Sometimes it seems that you have all the bases covered in your post but under stress you leave things out. Sorry. System here is Xubuntu 6.06 LTS (Debian). CUPS V-1.2.2. Okidata ML 320 Turbo. I found a post on the net where someone had the same issue. Upgrading from on old SCO box to Linux. They said this: <-- snip --> Since CUPS supports modern formats and languages, the sample drivers have to run your printers in graphics mode, which is significantly slower than the text mode used by the old SCO (System V) print spooler. The simplest fix is to use the interface scripts from your old server with CUPS: lpadmin -p printername -i scriptname.sh <-- snip --> I don't have access to the old system as it has sunk to "not working" yesterday. I gotta get this printer to print in text mode (high speed). Anything else you need, just ask. On 12/20/06, Kelsay, Brian - Kansas City, MO <brian.kelsay(a)kcc.usda.gov> wrote: > http://linuxmafia.com/faq/Essays/smart-questions.html > http://plone.org/documentation/how-to/ask-for-help > > You are doing pretty good, BUT you might like to tell us what distro of > Linux you installed, what version of CUPS, what config tools for CUPS, > if any, are installed. This is important for a few reasons, like what > updating tools might be used to install additional software, where apps > live (path to), etc. You did a really good job of describing the > problem, but you need to add those details so the solution can be > tailored to you. > > I might look at linuxprinting.org for config info on your printer. I > have not actually set up more than just an old laser printer under linux > and it may not have been using CUPS, but I got some good info there. > > > >-----Original Message----- > >From: On Behalf Of RtX > >Sent: Tuesday, December 19, 2006 5:10 PM > >To: KC Linux Users Group > >Subject: Cups - lpoptions - I Dunno?!?! > > > >So, I'm finishing up my conversion from SCO UNIX 3.2 / > >Keypoint to Linux. Got the data off the old server and onto > >the new server. Had the VAR setup Keypoint software and > >everything is working on that end. > >I still have a few hiccups that I'm working on and could use some help. > > > >1.) The Keypoint software requires WYSE 60 emulation to work properly. > >We are using SecureCRT for Windows workstation clients and all > >works well however, the ANSI characters are not the same as > >they were in the old serial terminals they were using. Dashes > >or hyphens that are used in the program for simple menus are > >now O's and the like. Is there a way (or setting) to get the > >proper characters back? > > > >2.) The biggest problem! They print from Keypoint using an > >Okidata ML320 9-pin printer which is connected to the server > >directly through lp0. The software prints everything fine but > >the printer prints in LQ mode instead of Draft mode. I need > >this printer to print in Draft mode for speed reasons. All > >settings on the front panel of the printer are overridden by > >cups (or lp?) at print time so simply selecting "Draft" > >from the printer's front panel does not work. > > > >On the old system, the printer would print everything in Draft > >mode and all was good. They have one certain page that they > >print that they would select a CPI of 17 (instead of 10) to > >get everything on the page. This no longer works. If I select > >a CPI of 17 on the front panel, then try to print this page, > >the CPI is changed back to 10 by the server. > > > >If I add "raw=true" in /etc/cups/lpoptions, the printer will > >print in Draft mode but does not handle page length properly. > >It feels like I need to add a "Draft" option to lpoptions but > >I have not found any reference to setting print quality in > >lpoptions on the net so I'm stuck. > > > >Comments? Please help and thanks a bunch! > > > >-- > >RtX... > > > >Ty Unes - Overland Park, Ks. > >riverty(a)gmail.com > -- RtX... Ty Unes - Overland Park, Ks. riverty(a)gmail.com

3 4

Re: [DISCUSS] 10 Good Unix command line habits
by Ed Allen 21 Dec '06

21 Dec '06

> ----- Forwarded message from Luke-Jr <luke(a)dashjr.org> ----- > Notes: > In "Quote variables with caution", it says to use square brackets, and then > goes on to give a correct example with curly braces. > "Stop piping cats" only refers to piping to grep, but in reality there's > almost never a good reason to pipe a single-file cat. The < operator provides > a file on standard input. So "cat foo | wc -l" can become "wc -l < foo" > An easy to see case where 'cat' is truly the easiest way... (cat /tmp/header; date; uptime;cat - /tmp/signature) | \ mail -s 'A case where cat is needed' kclug(a)kclug.org The ( ) pair spawns s sub-shell which allows multiple commands to share the same input, output, and error streams. In this case I used 'date' and 'uptime' along with a second 'cat'. The second 'cat' reads from stdin (standard in) till it sees EOF (End Of File <Control-D>) and then follows that with the /tmp/signature file. Stdout of all those commands is sent to stdin of the 'mail' command.

1 0

Cups - lpoptions - I Dunno?!?!
by RtX 20 Dec '06

20 Dec '06

So, I'm finishing up my conversion from SCO UNIX 3.2 / Keypoint to Linux. Got the data off the old server and onto the new server. Had the VAR setup Keypoint software and everything is working on that end. I still have a few hiccups that I'm working on and could use some help. 1.) The Keypoint software requires WYSE 60 emulation to work properly. We are using SecureCRT for Windows workstation clients and all works well however, the ANSI characters are not the same as they were in the old serial terminals they were using. Dashes or hyphens that are used in the program for simple menus are now O's and the like. Is there a way (or setting) to get the proper characters back? 2.) The biggest problem! They print from Keypoint using an Okidata ML320 9-pin printer which is connected to the server directly through lp0. The software prints everything fine but the printer prints in LQ mode instead of Draft mode. I need this printer to print in Draft mode for speed reasons. All settings on the front panel of the printer are overridden by cups (or lp?) at print time so simply selecting "Draft" from the printer's front panel does not work. On the old system, the printer would print everything in Draft mode and all was good. They have one certain page that they print that they would select a CPI of 17 (instead of 10) to get everything on the page. This no longer works. If I select a CPI of 17 on the front panel, then try to print this page, the CPI is changed back to 10 by the server. If I add "raw=true" in /etc/cups/lpoptions, the printer will print in Draft mode but does not handle page length properly. It feels like I need to add a "Draft" option to lpoptions but I have not found any reference to setting print quality in lpoptions on the net so I'm stuck. Comments? Please help and thanks a bunch! -- RtX... Ty Unes - Overland Park, Ks. riverty(a)gmail.com

2 1

Fwd: [DISCUSS] 10 Good Unix command line habits
by Don Ellis 18 Dec '06

18 Dec '06

KC Guys - I thought you might like to see this item. --Don Ellis ---------- Forwarded message ---------- From: Ed Howland <ed.howland(a)gmail.com> Date: Dec 16, 2006 2:09 PM Subject: [DISCUSS] 10 Good Unix command line habits To: discuss(a)sluug.org, Central West End Linux Users Group < cwe-lug(a)lists.firepipe.net> A good article from IBM developerWorks. http://tinyurl.com/vof3r Or the full thing: http://www-128.ibm.com/developerworks/aix/library/au-badunixhabits.html?ca=… Now some of the examples don't work (mkdir with parenthesized dirs) on Debian-like systems. But you might find a few gems there. I did. Ed -- Ed Howland http://greenprogrammer.blogspot.com ------- St. Louis Unix Users Group - http://www.sluug.org/ To unsubscribe from the SLUUG discussion mailing list, send a message to discuss-request(a)sluug.org with the word 'unsubscribe' as the body

3 3

Fwd: Fwd: Fwd: [DISCUSS] 10 Good Unix command line habits
by Don Ellis 18 Dec '06

18 Dec '06

A response from a St. Louis colleague: ---------- Forwarded message ---------- From: Robert Citek <robert.citek(a)gmail.com> Date: Dec 17, 2006 7:42 PM Subject: Re: Fwd: Fwd: [DISCUSS] 10 Good Unix command line habits To: discuss(a)sluug.org Also, in "Use escape sequences to manage long input", there's no need to put a backslash after a pipe (|), logical or (||), or logical and (&&). So, this: ~ $ cd tmp/a/b/c || \ > mkdir -p tmp/a/b/c && \ > tar xvf -C tmp/a/b/c ~/archive.tar can be re-written as this: ~ $ cd tmp/a/b/c || > mkdir -p tmp/a/b/c && > tar xvf -C tmp/a/b/c ~/archive.tar Happy Holidays to all. Regards, - Robert Don Ellis wrote: > Ed and Group, > > Here's a note from one of our KC colleagues (to whom I forwarded this) > pointing out an error on the page (which I noticed but didn't share). > > --Don Ellis > > > ---------- Forwarded message ---------- > From: *Luke-Jr* <luke(a)dashjr.org <mailto:[email protected]>> > Date: Dec 17, 2006 12:54 AM > Subject: Re: Fwd: [DISCUSS] 10 Good Unix command line habits > To: kclug(a)kclug.org <mailto:[email protected]> > > Notes: > In "Quote variables with caution", it says to use square brackets, and then > goes on to give a correct example with curly braces. > "Stop piping cats" only refers to piping to grep, but in reality there's > almost never a good reason to pipe a single-file cat. The < operator > provides > a file on standard input. So "cat foo | wc -l" can become "wc -l < foo" ------- St. Louis Unix Users Group - http://www.sluug.org/ To unsubscribe from the SLUUG discussion mailing list, send a message to discuss-request(a)sluug.org with the word 'unsubscribe' as the body

1 0

minix 3 released under BSD-like license
by David Nicol 17 Dec '06

17 Dec '06

http://www.minix3.org/ maybe this development will spur an open device driver standard, or adoption of wrappers for the unified BSD driver standard into other frameworks -- He thought he could organize freedom how naive and controlling of him

4 3

Dan's Guardian
by Dale Beams 15 Dec '06

15 Dec '06

Does anybody know an alternative to Dan's Guaurdian? His license details are muddy. _________________________________________________________________ Stay up-to-date with your friends through the Windows Live Spaces friends list. http://clk.atdmt.com/MSN/go/msnnkwsp0070000001msn/direct/01/?href=http://sp…

4 6

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

KCLUG